Subi Tek
Subi Tek
Kovai Pudur, Coimbatore, Tamil Nadu
SEND SMS
SEND EMAIL

Structural Engineering Laboratory Equipment

We are manufacturer and Supplier of Structural Engineering Laboratory Equipment such as, Loading Frame, Hydraulic Jack, Load Cell, Proving Ring, Demec Gauge, Electrical Strain Gauge, Rebound Hammer, Ultrasonic Pulse Velocity Tester, Dial Gauge, Clinometer, Vibration Exciter, Vibration Meter, FFT Analyser etc

FFT Analyzer

FFT Analyzer
  • FFT Analyzer
Get Best Quote
Approx. Price: Rs 2.5 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSubi Tek
Accuracy1.0 dB
DisplayDigital
ModelSGE#W
Usage/ApplicationLaboratory
Measurement Range35-130 dB
CalibrationAutomatic
Resolution1 dB
MaterialSteel

FFT Analyse

We offer FFT Analyser in Coimbatore, Chennai, Tamilnadu etc.
FFT analyzers With time domain signal recording. Instrument is intended to general acoustics and vibration measurements, environmental monitoring, occupational health and safety monioring. Three indivisual profiles allow parllel measurements with independently defined filters and RMS detector time constants. Each profile provides number of results like for sound Leq, LMax, LMin, Lpeak, Spl SEL or RMS, PEAK, VDV, MTVV, in case of vibration measurements.Advanced time History logging for each profile.
Request
Callback
Yes! I am Interested

Construction QC Lab Equipment

Construction QC Lab Equipment
  • Construction QC Lab Equipment
Get Best Quote
Approx. Price: Rs 5,999 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialSteel
Automation GradeAutomatic
CustomizedYes
Product TypeConcrete Lab Equipment
ColorBlue
PortableYes
ReusableYes
Is It AnodizedAnodized
BrandSubi Tek
Is It CustomizedCustomized
ConditionNew
Accuracy1"

We are manufacture of QC Lab Testing Equipments in Coimbatore, Chennai, Tamilnadu, Such as, Surveying Instruments, Soil Testing Instruments, Concrete Testing Equipments, Asphalt Testing Equipment, Aggregate Testing Equipment, Bitumen Testing Equipments etc

 

Construction QC Lab Equipment Manufacturer in Tamilnadu,  Construction QC Lab Equipment Manufacturer in Chennai, Construction QC Lab Equipment Manufacturer in Kanchipuram,  Construction QC Lab Equipment Manufacturer in Tiruvallur, Construction QC Lab Equipment Manufacturer in Cuddalore, Construction QC Lab Equipment Manufacturer in  Villupuram, Construction QC Lab Equipment Manufacturer in Vellore,  Construction QC Lab Equipment Manufacturer in Tiruvannamalai, Construction QC Lab Equipment Manufacturer in Salem,  Construction QC Lab Equipment Manufacturer in Namakkal, Construction QC Lab Equipment Manufacturer in Dharmapuri, Construction QC Lab Equipment Manufacturer in Erode, Construction QC Lab Equipment Manufacturer in Coimbatore, Construction QC Lab Equipment Manufacturer in The Nilgiris, Construction QC Lab Equipment Manufacturer in Thanjavur, Construction QC Lab Equipment Manufacturer in Nagapattinam, Construction QC Lab Equipment Manufacturer in Tiruvarur,  Construction QC Lab Equipment Manufacturer in Tiruchirappalli, Construction QC Lab Equipment Manufacturer in Karur, Construction QC Lab Equipment Manufacturer in Perambalur, Construction QC Lab Equipment Manufacturer in Pudukkottai, Construction QC Lab Equipment Manufacturer in Madurai, Construction QC Lab Equipment Manufacturer in Theni, Construction QC Lab Equipment Manufacturer in Dindigul, Construction QC Lab Equipment Manufacturer in Ramanathapuram, Construction QC Lab Equipment Manufacturer in Virudhunagar, Construction QC Lab Equipment Manufacturer in Sivagangai, Construction QC Lab Equipment Manufacturer in Tirunelveli, Construction QC Lab Equipment Manufacturer in Thoothukkudi, Construction QC Lab Equipment Manufacturer in Kanniyakumari, Construction QC Lab Equipment Manufacturer in Krishnagiri, Construction QC Lab Equipment Manufacturer in Ariyalur, Construction QC Lab Equipment Manufacturer in Tiruppur

 

Request
Callback


Additional Information:

  • Item Code: SubiQC
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested

Loading Frame

Loading Frame
  • Loading Frame
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialSteel
BrandSTEK
Voltage230V
PhaseSingle
ColorYellow

Loading Frame

We offer Loading Frame  in Coimbatore, Chennai, Tamilnadu
Request
Callback
Yes! I am Interested

Demec Gauge

Demec Gauge
  • Demec Gauge
Get Best Quote
Approx. Price: Rs 25,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSTEK
ModelMechanical
MaterialSteel
ColorYellow
Measuring Range0-25

Demec Gauge

We are manufacturer of Demec Gauge in Coimbatore, Chennai, Tamilnadu.

The DEMEC consists of a dial gauge attached to an Invar bar. A fixed conical point is mounted at one end of the bar, and a moving conical point is mounted on a knife edge pivot at the opposite end. The pivoting movement of this second conical point is measured by the dial gauge.
A setting-out bar is used to position pre-drilled stainless-steel discs which are attached to the structure using a suitable adhesive. Each time a reading is taken, the conical points are inserted into the holes of the discs and the reading on the dial gauge noted. In this way, strain changes in the structure are converted into a change in the reading on the dial gauge.
An Invar reference bar is provided for calibration. 
Originally designed for use on concrete structures, the gauge is just as suitable for use on other types of structure, including steel when the locating holes can be drilled directly into the steel if required.

Measurement range is 100mm +3.2/-1.6mm.
Request
Callback
Yes! I am Interested

Vibration Meter

Vibration Meter
  • Vibration Meter
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
ModelSDTIRIE
BrandSTEK
Usage/ApplicationLaboratory
ApplicationLaboratory
MaterialSteel

  • Applications for industrial vibration monitoring : All industrial machinery vibrates. The level of vibration is a useful guide to machine condition. Poor balance, misalignment and looseness of the structure will causethe vibration level increase, it is a sure sign that the maintenance is needed.
  • Frequency range 10 Hz - 1 kHz,sensitivity relative meet ISO 2954.
  • Supply with vibration sensor magnetic base, full set.
  • Velocity range : 200 mm/s.
  • Acceleration range : 200 m/s^2
  • RMS Peak measurement.
  • Data hold, Memory ( Max. Min. ).
  • Separate vibration probe.
  • Optional data acquisition software.
  • Microcomputer circuit.
  • Auto shut off saves battery life.
  • Hard carrying case included
Request
Callback
Yes! I am Interested

Electrical Strain Gauge with indicator

Electrical Strain Gauge with indicator
  • Electrical Strain Gauge with indicator
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSTEK
ModelSTWQTW
MaterialSteel
ColorWhite

Electrical Strain Gauge with indicator

We manufacturer of Electrical Strain Gauge with indicator in Coimbatore, Chennai, Tamilnadu etc.
Strain Gauges are designed in various configurations to suit varied industrial applications. These Strain Gauges are either foil type or semi-conductor type. These Strain Gauges are very suitable for single, dual and multi axial Strain Gauges measurements. During the production, precision and accuracy are at high priority to ensure that the end products provides complete and highly accurate results. The Strain Gauges can be used to sensor changes in force, pressure, tension, weight, etc. The load cells provided with these Strain Gauges normally run longer than usual.
Request
Callback
Yes! I am Interested

Proving Rings

Proving Rings
  • Proving Rings
Get Best Quote
Approx. Price: Rs 15,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialSteel
BrandSTEK
ColorBlue
Usage/ApplicationLaboratory

Proving Rings
We offer Proving Rings in Coimbatore, Chennai, Tamilnadu.

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement Bitumen Testing Equipments like Direct Shear Test Apparatus, Triaxil Shear Test Apparatus, C.B.R. Test, Uncontined Test, Marshall Test etc. 
They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.
Salient Features
  • A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remotest chance of shifting due to inadvement shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F femal threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.
    Calibration charts from Standard Laboratories for the Proving Rings ordered are also available at extra cost.
    All Proving Rings are Integral Type.
    Integral type Compressive Proving Rings of different capacities from 50kgf to 200000kgf are available.
    (a) above cap. 50 to 500kg.
    (b) above cap. 500 to 3000kg.
    (c) above cap. 3000 to 5000kg.
    (d) above cap. 5000 to 10000 kg.
    (e) above cap. 10000 to 20000 kg.
    (f) above cap. 20000 to 30000kg.
    (g) above cap. 30000 to 50000 kg.
    (h) above cap. 50000 to 100000 kg.
    (i) above cap. 100000 to 200000 kg.
    (j) above cap. 200000 to 300000 kg.
Request
Callback
Yes! I am Interested

Ultrasonic Pulse Velocity Tester

Ultrasonic Pulse Velocity Tester
  • Ultrasonic Pulse Velocity Tester
Get Best Quote
Approx. Price: Rs 1.45 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Weight10kg
Display TypeLED
Automation GradeAutomatic
BrandSTEK

Ultrasonic Pulse Velocity Tester
We offer Ultrasonic Pulse Velocity Tester in Coimbatore, Chennai, Tamilnadu.
Test Mode : Through transmission mode. 02. Transit Time Range : 0.1 Micro sec to 9999.9 Micro sec. 03. Measurement Units : Time in Micro sec. 04. Resolution : 0.1 Micro sec 05. Calibrated Accuracy : 0.1 Micro sec. 06. Penetration Range : upto 5 m in concrete 07. Frequency Response : 1 kHz to 1000 kHz. 08. Input Sensitivity : 1 mV. 09. Input Impedance : 1M ohms. 10. Pulse Repetition Freq. : 30 Hz 11. Pulse Energy : 1000 V 12. Display : 128 * 64 Graphic LCD display 13. Transducer.R
Request
Callback
Yes! I am Interested

Compression Proving Rings

Compression Proving Rings
  • Compression Proving Rings
Get Best Quote
Approx. Price: Rs 8,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Automation GradeSemi-Automatic
BrandSubitek
ConditionNew

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement Bitumen Testing Equipments like Direct Shear Test Apparatus, Triaxil Shear Test Apparatus, C.B.R. Test, Uncontined Test, Marshall Test etc.
They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.
Salient Features
  • A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remotest chance of shifting due to inadvement shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F femal threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.
    Calibration charts from Standard Laboratories for the Proving Rings ordered are also available at extra cost.
    All Proving Rings are Integral Type.
    Integral type Compressive Proving Rings of different capacities from 50kgf to 200000kgf are available.
    (a) above cap. 50 to 500kg.
    (b) above cap. 500 to 3000kg.
    (c) above cap. 3000 to 5000kg.
    (d) above cap. 5000 to 10000 kg.
    (e) above cap. 10000 to 20000 kg.
    (f) above cap. 20000 to 30000kg.
    (g) above cap. 30000 to 50000 kg.
    (h) above cap. 50000 to 100000 kg.
    (i) above cap. 100000 to 200000 kg.
    (j) above cap. 200000 to 300000 kg.

Compression Proving Ring Manufacturer in Coimbatore, Compression Proving Ring Manufacturer in Tamilnadu, Compression Proving Ring Dealer in Chennai, Compression Proving Ring Supplier in Coimbatore, Compression Proving Ring Dealer in Coimbatore, Compression Proving Ring Dealer in Tamilnadu, Compression Proving Ring Price in Coimbatore, Compression Proving Ring Online Shopping Coimbatore, Compression Proving Ring Price in Coimbatore, Compression Proving Ring Price in Tamilnadu, Compression Proving Ring Manufacturer in Kerala, Compression Proving Ring Manufacturer in Palakad

 

 

Compression Proving Ring Manufacture in Tamilnadu, Compression Proving Ring Manufacture in Chennai, Compression Proving Ring Manufacture in Kanchipuram, Compression Proving Ring Manufacture in Tiruvallur, Compression Proving Ring Manufacture in Cuddalore, Compression Proving Ring Manufacture in Villupuram, Compression Proving Ring Manufacture in Vellore, Compression Proving Ring Manufacture in Tiruvannamalai, Compression Proving Ring Manufacture in Salem, Compression Proving Ring Manufacture in Namakkal, Compression Proving Ring Manufacture in Dharmapuri, Compression Proving Ring Manufacture in Erode, Compression Proving Ring Manufacture in Coimbatore, Compression Proving Ring Manufacture in The Nilgiris, Compression Proving Ring Manufacture in Thanjavur, Compression Proving Ring Manufacture in Nagapattinam, Compression Proving Ring Manufacture in Tiruvarur, Compression Proving Ring Manufacture in Tiruchirappalli, Compression Proving Ring Manufacture in Karur,

Request
Callback


Additional Information:

  • Item Code: SubiCPR
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested

Sample Splitter

Sample Splitter
  • Sample Splitter
Get Best Quote
Approx. Price: Rs 12,500 / PieceGet Latest Price

Product Details:

MaterialMetal
Capacity25mm 16 chute

Used for sampling aggregates ores refr actory materials, pigments powdered coal, soap, cement etc.
Salient Features
  • Specifications:It consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material.
    13 mm 14 Chutes
    25 mm 16 Chutes
    38 mm 12 Chutes
    50 mm 12 Chutes
    63 mm 12 Chutes
Request
Callback
Yes! I am Interested

Vibration Exciter

Vibration Exciter
  • Vibration Exciter
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price

Product Details:

PowerThree Phase
SpeedVariable Speed

Vibration Exciter

We offer Vibration Exciter in Coimbatore, Chennai, Tamilnadu

  • Specifications : The equipment consists of : A Vibrating Table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the floor, complete with start/stop switch, cord and plug. A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve. The swivel arm is also detachable from the Vibrating Table. A graduated rod is fixed on a swivel arm and at its end a plastic disc is screwed. The division of scale on the rod record the slump of the concrete in millimeters, supplied complete with a sheet metal container with lifting handles which can easily be fixed to the Vibrating Table. A slump cone open at both ends with lifting handles and a Tamping rod of size 16mm dia and 600mm long, rounded at one end.
Request
Callback
Yes! I am Interested

Erichsen Cupping Testing Machine

Erichsen Cupping Testing Machine
  • Erichsen Cupping Testing Machine
Get Best Quote
Approx. Price: Rs 90,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSTEK
PhaseSingle
Power SourceElectric

Erichsen Cupping Testing Machine

This is designed to reveal the cupping qualities of metal sheets strips and also to test the adhesion, elasticity porosity of coasts of plants or varnish by way of comparison. The appearance of material also of its constitution to some extent.

Tag??Erichsen Cupping Testing Machine??manufacture in Coimbatore,Salem, Erode, Dharmapuri??Erichsen Cupping Testing Machine??Dealer in Coimbatore,Salem, Erode, Dharmapuri,??Erichsen Cupping Testing Machine??Distributor in Coimbatore,Salem, Erode, Dharmapuri
Request
Callback
Yes! I am Interested

Density Basket

Density Basket
  • Density Basket
Get Best Quote
Approx. Price: Rs 1,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationBitumen Testing
MaterialSteel
Height1/2 Meter

For density tests on aggregates as per procedure laid down.
Salient Features
  • Specifications: Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle.
Request
Callback
Yes! I am Interested

Indian Standard Sand (Ennore Sand)

Indian Standard Sand (Ennore Sand)
  • Indian Standard Sand (Ennore Sand)
Get Best Quote
Approx. Price: Rs 2,100 / BagGet Latest Price

Product Details:

Packaging Size25kg
Usage/ApplicationLaboratory

Foundry sand consists primarily of clean, uniformly sized, high-quality silica sand or lake sand that is bonded to form molds for ferrous (iron and steel) and nonferrous (copper, aluminum, brass) metal castings. Although these sands are clean prior to use, after casting they may contain Ferrous (iron and steel) industries account for approximately 95 percent of foundry sand used for castings. The automotive industry and its parts suppliers are the major generators of foundry sand.

The most common casting process used in the foundry industry is the sand cast system. Virtually all sand cast molds for ferrous castings are of the green sand type. Green sand consists of high-quality silica sand, about 10 percent bentonite clay (as the binder), 2 to 5 percent water and about 5 percent sea coal (a carbonaceous mold additive to improve casting finish). The type of metal being cast determines which additives and what gradation of sand is used. The green sand used in the process constitutes upwards of 90 percent of the molding materials used.(1)

In addition to green sand molds, chemically bonded sand cast systems are also used. These systems involve the use of one or more organic binders (usually proprietary) in conjunction with catalysts and different hardening/setting procedures. Foundry sand makes up about 97 percent of this mixture. Chemically bonded systems are most often used for "cores" (used to produce cavities that are not practical to produce by normal molding operations) and for molds for nonferrous castings.

The annual generation of foundry waste (including dust and spent foundry sand) in the United States is believed to range from 9 to 13.6 million metric tons (10 to 15 million tons).(2) Typically, about 1 ton of foundry sand is required for each ton of iron or steel casting produced.

Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Karuppusamy M (Proprietor)
9/10, Ragavendra Nagar, Near Sathya Nagar B. K. Pudur
Kovai Pudur, Coimbatore- 641008, Tamil Nadu, India



Call Us

Share Us

F GT L


Send E-mailSend SMS