Fluid Mechanics & Machinery Laboratory Equipments

Product Details:

Flow Over Notches Recirculating Type :

Technical Specification :

 

Types of notch :

600 v notch , rectangular notch, Trapezoidal.

 

Flow channel :

250 x 250x 1250 mm with notches fitting arrangement.

 

Pipes and Valves

1” G.I. piping and 1” Brass valves.

 

Water storage Unit

Sump Tank – 900 x 400 x 400 mm M.S. tank with F.R.P. coating. Or S.S. tank.

Tank Capacity – 125 Liters (Approx.).

 

Measurement :

Depth Gauge to measure depth of flow

Measuring tank.=400 x 300 x 300mm with pizometric arrangement.

Tank Capacity – 35 Liters (Approx.)

 

Supply pump set

1/2 H.P.monoblock centrifugal pump.

 

Electricals and service required

1 Ph 230 volt AC supply

Floor space – 2 m x 2 m with suitable water supply. 

Tag: Flow Over Notches Recirculating Type manufacture in Coimbatore,Salem, Erode, Dharmapuri Flow Over Notches Recirculating Type Dealer in Coimbatore,Salem, Erode, Dharmapuri, Flow Over Notches Recirculating Type Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Hydraulic Flume Assembly :

SPECIFICATIONS:-

1. A hydraulic flume of c/s 200x300 mm 6000 mm length with transparent window on either sides of 1000 mm length.

 

2. Sliding gates one at upstream and other at the downstream side.

3. Screw jack for change of the slope of the flume.

4. A Sump tank of sufficient capacity.

5. Supply tank with waves damping arrangement.

6. A 1 H.P. centrifugal monoblock pump.

7. A Orificemeter with manometer to measure the discharge. Inlet/throat dimensions: 50/25 mm respectively.

8. Trolley with point gauge for level measurement.

Tag: Hydraulic Flume Assembly manufacture in Coimbatore,Salem, Erode, Dharmapuri Hydraulic Flume Assembly Dealer in Coimbatore,Salem, Erode, Dharmapuri, Hydraulic Flume Assembly Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Flow Measurement By Venturimeter : 

Flow Measurement By Venturi meter And Orifice meter Re Circulation

DESCRIPTION:-

The unit consist of two pipe emerging out from common manifold along with a venturimeter orifice meter, tapping are provided to measure pressure differences which are connected to differential manometer. A flow regulating valve is provided at the down speed stream of pipe. A measuring tank is provided to collect the flow. The actual flow rate can be measure are both meters calibrated.

Features:-

A) Two pipes emerging out from a common manifold with a orifice meter.

B) Each line is provided with flow control valve for setting of differential flow rates.

C) Pressure of different pipe lines are connected.

D) Flow control valve at the end of each line assures for full running of pipe.

Range Of Experiments:-

1) Calibration of venturi meter.

2) Calibration of orifice meter.

Specification:

1) Measuring tank stop watch.

2) Basic piping-1”

3) Orifice meter venturi meter

Tag: Flow Measurement By Venturimeter manufacture in Coimbatore,Salem, Erode, Dharmapuri Flow Measurement By Venturimeter Dealer in Coimbatore,Salem, Erode, Dharmapuri, Flow Measurement By Venturimeter Distributor in Coimbatore,Salem, Erode, Dharmapuri 

Product Details:

Flow Through Mouthpiece :

Aim : 

Determination of coefficient of discharged (Cd) coefficient of velocity (CV) coefficient of contraction (Cc) for orifice.

Supply tank -

1) An arrangement to obtain a steady or quiescent flow.

2) An arrangement to vary the head by changing the position of over flow pipe.

3) Piezometer tube to measure head.

4) An arrangement to measure co-ordinate of jet.

Specification:

1) Main supply tank with orifice mouthpiece fitting arrangement.

2) Diameter of Orifice-8.5mm,Diameter of mouthpiece-8.5mm.,Nozzle-25mm. 50mm length.

3) Tracer pointer with scale.

4) Measuring tank

5) Stop watch.

Service Required

1) Suitable Water supply

2) Suitable floor space of 1.5 m. x 1.5 m.

Tag: Flow Through Mouthpiece manufacture in Coimbatore,Salem, Erode, Dharmapuri Flow Through Mouthpiece Dealer in Coimbatore,Salem, Erode, Dharmapuri, Flow Through Mouthpiece Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

We are manufacturer of Measuring Jar 50ml, 100ml, 250ml, 500ml, in Chennai, Tamilndu.

Backed by professionalism, we are dealing in production of Measuring Jar to our clients. It finds application in laboratories at is used for holding important chemical compounds and powder with ease. Owing to its robust body and precise dimensions, it is widely demanded among our client base. It is available in wide ranging specifications and is resistant to crack and harsh temperature. We are offering Measuring Jar at economical price to our clients.

 

 

Features:

 

• Compact construction
• Flexible
• Tensile strength

Measuring Jar Manufacturer in Chennai, Measuring Jar Dealer in Chennai, Measuring Jar Shop in Chennai, Measuring Jar Supplier in Chennai, Measuring Jar Price in Chennai

 

 

 

Measuring Jar Manufacturer in Tamilnadu, Measuring Jar Manufacturer in Chennai, Measuring Jar Manufacturer in Kanchipuram, Measuring Jar Manufacturer in Tiruvallur, Measuring Jar Manufacturer in Cuddalore, Measuring Jar Manufacturer in Villupuram, Measuring Jar Manufacturer in Vellore, Measuring Jar Manufacturer in Tiruvannamalai, Measuring Jar Manufacturer in Salem, Measuring Jar Manufacturer in Namakkal, Measuring Jar Manufacturer in Dharmapuri, Measuring Jar Manufacturer in Erode, Measuring Jar Manufacturer in Coimbatore, Measuring Jar Manufacturer in The Nilgiris, Measuring Jar Manufacturer in Thanjavur, Measuring Jar Manufacturer in Nagapattinam, Measuring Jar Manufacturer in Tiruvarur, Measuring Jar Manufacturer in Tiruchirappalli, Measuring Jar Manufacturer in Karur, Measuring Jar Manufacturer in Perambalur, Measuring Jar Manufacturer in Pudukkottai, Measuring Jar Manufacturer in Madurai, Measuring Jar Manufacturer in Theni, Measuring Jar Manufacturer in Dindigul, Measuring Jar Manufacturer in Ramanathapuram, Measuring Jar Manufacturer in Virudhunagar, Measuring Jar Manufacturer in Sivagangai, Measuring Jar Manufacturer in Tirunelveli, Measuring Jar Manufacturer in Thoothukkudi, Measuring Jar Manufacturer in Kanniyakumari, Measuring Jar Manufacturer in Krishnagiri, Measuring Jar Manufacturer in Ariyalur, Measuring Jar Manufacturer in Tiruppur

 

 

 

Product Details:

Reynolds Apparatus :

Description:-

The unit consists of a Acrylic tube connected to a tank. At entrance of tube a bell mouth section is provided and at the other end a valve is provide to control the rate of flow. A capillary tube is introduced centrally to the bell mouth to inject die. By varying the rate of flow the Reynolds number changes. This also changes type of flow. Visual observation of die (thread) will indicate the type of flow which can be confirmed from the REYNOLDS number computed.

Features:-

a) Steady flow arrangement

b) Very clear flow visualization

c) Fine control of die thread.

d) Accurate flow measurement control.

Tag: Reynolds Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Reynolds Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Reynolds Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri 

Product Details:

Study Of Pressure Measurement Apparatus : 

This is a board mounted model which demonstrates various types of pressure measurement devices used in common practice. The devices incorporated are

i) Single well Manometer.

ii) Differential Manometer.

iii) Sensitive Manometer.

iv) Pressure Gauge.

v) Vacuum Gauge.

These devices are coupled to suction and discharge piping of Hydraulic Bench Pump and a close circulation systems is established, with this set up, the working and operating principle of the pressure measuring devices can be studied.

Tag: Study Of Pressure Measurement Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Study Of Pressure Measurement Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Study Of Pressure Measurement Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

We are offering a high quality of Hydraulic Trainer Kit. This range of hydraulic trainer kit is fabricated using premium quality raw material in compliance with the international quality standards to ensure its durability, corrosion resistance and optimum quality.

Features:

• High quality
• Reasonable price
• Corrosion resistance

Product Details:

Metacentric Height Of Ship Model Apparatus :

DESCRIPTION:-

 

The unit consists of a small tank. Water is poured in it; so that a small ship model can float over it .The ship model is provided with a horizontal guide bar over which a small weight can be slided. Displacement of weight is measured with a scale. A pointer is attached at the centre of ship. When the weight is slide the ship tilts. The angle of tilt is measured by displacement of pointer from then the metacentric height of ship can be studied.

Tag: Metacentric Height Of Ship Model Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Metacentric Height Of Ship Model Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Metacentric Height Of Ship Model Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Losses In Pipe Fitting Apparatus :

DESCRIPTION:-

 

The unit provide study of losses of pipe in various pipe fitting. A differential manometer supply to measure the loss of head in these fitting. A flow control valve is provided. An experiment can be carried out at various flow rates.

FEATURES:-

 

1) Testing of pipe circuit consisting of sudden contraction, sudden enlargement bends etc.

2) Measurement of head loss at each section for various flow conditions.

Tag: Losses In Pipe Fitting Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Losses In Pipe Fitting Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Losses In Pipe Fitting Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Pneumatic Trainer Kit :

SPECIFICATIONS:

Single acting cylinder

Double acting cylinder

5/2 Double Solenoid valve

5/2 Single solenoid valve

Flow control valve fitted in cylinder

PLC 6 input/4 output

Push buttons

Toggle switch

On-off sliding valve

Industrial Limit switches Quick fix Connectors Electrical terminals for input/output

Tag: Pneumatic Trainer Kit manufacture in Coimbatore,Salem, Erode, Dharmapuri Pneumatic Trainer Kit Dealer in Coimbatore,Salem, Erode, Dharmapuri, Pneumatic Trainer Kit Distributor in Coimbatore,Salem, Erode, Dharmapuri

Pnumatic Trainer Kit Manufacturer in Coimbatore, Pnumatic Trainer Kit Dealer in Coimbatore, Pnumatic Trainer Kit Shop in Coimbatore, Pnumatic Trainer Kit Supplier in Coimbatore, Pnumatic Trainer Kit Price in Coimbatore

 

 

 

Pnumatic Trainer Kit Manufacturer in Tamilnadu, Pnumatic Trainer Kit Manufacturer in Chennai, Pnumatic Trainer Kit Manufacturer in Kanchipuram, Pnumatic Trainer Kit Manufacturer in Tiruvallur, Pnumatic Trainer Kit Manufacturer in Cuddalore, Pnumatic Trainer Kit Manufacturer in Villupuram, Pnumatic Trainer Kit Manufacturer in Vellore, Pnumatic Trainer Kit Manufacturer in Tiruvannamalai, Pnumatic Trainer Kit Manufacturer in Salem, Pnumatic Trainer Kit Manufacturer in Namakkal, Pnumatic Trainer Kit Manufacturer in Dharmapuri, Pnumatic Trainer Kit Manufacturer in Erode, Pnumatic Trainer Kit Manufacturer in Coimbatore, Pnumatic Trainer Kit Manufacturer in The Nilgiris, Pnumatic Trainer Kit Manufacturer in Thanjavur, Pnumatic Trainer Kit Manufacturer in Nagapattinam, Pnumatic Trainer Kit Manufacturer in Tiruvarur, Pnumatic Trainer Kit Manufacturer in Tiruchirappalli, Pnumatic Trainer Kit Manufacturer in Karur, Pnumatic Trainer Kit Manufacturer in Perambalur, Pnumatic Trainer Kit Manufacturer in Pudukkottai, Pnumatic Trainer Kit Manufacturer in Madurai, Pnumatic Trainer Kit Manufacturer in Theni, Pnumatic Trainer Kit Manufacturer in Dindigul, Pnumatic Trainer Kit Manufacturer in Ramanathapuram, Pnumatic Trainer Kit Manufacturer in Virudhunagar, Pnumatic Trainer Kit Manufacturer in Sivagangai, Pnumatic Trainer Kit Manufacturer in Tirunelveli, Pnumatic Trainer Kit Manufacturer in Thoothukkudi, Pnumatic Trainer Kit Manufacturer in Kanniyakumari, Pnumatic Trainer Kit Manufacturer in Krishnagiri, Pnumatic Trainer Kit Manufacturer in Ariyalur, Pnumatic Trainer Kit Manufacturer in Tiruppur

Additional Information:

• Item Code: Subitsie

Product Details:

Metacentric Height Apparatus

We offer

Metacentric Height Apparatus in Coimbatore, Chennai, Tamilnadu

Metacentric Height Apparatus

Features:

• Quality product
• Reasonable price
• Fine finish

Taag:

Metacentric Height Apparatus Manufacture in Tamilnadu,  Metacentric Height Apparatus Manufacture in Chennai, Metacentric Height Apparatus Manufacture in Kanchipuram,  Metacentric Height Apparatus Manufacture in Tiruvallur, Metacentric Height Apparatus Manufacture in Cuddalore, Metacentric Height Apparatus Manufacture in  Villupuram, Metacentric Height Apparatus Manufacture in Vellore,  Metacentric Height Apparatus Manufacture in Tiruvannamalai, Metacentric Height Apparatus Manufacture in Salem,  Metacentric Height Apparatus Manufacture in Namakkal, Metacentric Height Apparatus Manufacture in Dharmapuri, Metacentric Height Apparatus Manufacture in Erode, Metacentric Height Apparatus Manufacture in Coimbatore, Metacentric Height Apparatus Manufacture in The Nilgiris, Metacentric Height Apparatus Manufacture in Thanjavur, Metacentric Height Apparatus Manufacture in Nagapattinam, Metacentric Height Apparatus Manufacture in Tiruvarur,  Metacentric Height Apparatus Manufacture in Tiruchirappalli, Metacentric Height Apparatus Manufacture in Karur, Metacentric Height Apparatus Manufacture in Perambalur, Metacentric Height Apparatus Manufacture in Pudukkottai, Metacentric Height Apparatus Manufacture in Madurai, Metacentric Height Apparatus Manufacture in Theni, Metacentric Height Apparatus Manufacture in Dindigul, Metacentric Height Apparatus Manufacture in Ramanathapuram, Metacentric Height Apparatus Manufacture in Virudhunagar, Metacentric Height Apparatus Manufacture in Sivagangai, Metacentric Height Apparatus Manufacture in Tirunelveli, Metacentric Height Apparatus Manufacture in Thoothukkudi, Metacentric Height Apparatus Manufacture in Kanniyakumari, Metacentric Height Apparatus Manufacture in Krishnagiri, Metacentric Height Apparatus Manufacture in Ariyalur, Metacentric Height Apparatus Manufacture in Tiruppur

Product Details:

Heleshaw Apparatus :

DESCRIPTION:

 

Flow visualisation apparatus is basically designed on Heleshaw principle of potential flow, which uses water as Fluid medium and dye solution forms the streamlines.

The thin test channel is formed between two acrylic plates and is having entry from the top and exit from the bottom. The model is placed between the acrylic plates. Both the Fluid medium and dye solution are poured into the top containers. The acrylic is kept open from the top so as to facilitate the insertion of the model into the Flow Visualisation Space.

The channel is placed vertically in a strong sturdy frame mounted on a “C” channel. At the outlet the brass cock is provided with an outlet pipe connection for the proper flow of the water.

SPECIFICATIONS:

 

1. Test Channel: White side acrylic plates, both smooth on test side, fixed in rigid framed structure.

 

Nominal Dimensions: 600 mm Long x 250 mm wide app. Depth of Channel can be varied by using different thickness models of rubber to some extent.

2. Dye container with small series of holes to facilitate proper flow of the dye.

EXPERIMENTS:

1. Visual observation of the flow patterns about:

1. Square Model.

2. Triangular Model.

3. Circular Model.

4. Aerofoil Model.

5. Oval/Eye Shaped Model.

Many more such models can be made and tested

Tag: Heleshaw Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Heleshaw Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Heleshaw Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Impact Of Jet Apparatus Recirculating Type :

SPECIFICATIONS:-

 

1) Circular box one leak proof of transparent side.

2) Differential lever mechanism dead weight to measure the force.

3) Measuring tank.-400x300x300mm

Nozzle diameter-8.5mm

Plates of shape.

600 inclined.

Curved plate.

C) FLATE

Measuring tank – 400 x 300 x 300mm

sump tank – 900 x 400 x400 mm.

Tag: Impact Of Jet Apparatus Recirculating Type manufacture in Coimbatore,Salem, Erode, Dharmapuri Impact Of Jet Apparatus Recirculating Type Dealer in Coimbatore,Salem, Erode, Dharmapuri, Impact Of Jet Apparatus Recirculating Type Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Pipe Friction Apparatus
With the aid of our quality oriented professionals, we are offering Pipe Friction Apparatus to our clients. It is used for determination of friction loss when an incompressible fluid flows through pipes. It is of great use for students for measuring pipe friction losses for laminar and turbulent flows. This apparatus can be used quite easily and is free from defects. This apparatus is widely preferred by our clients.

Taag: Pipe Friction Apparatus Manufacture in Tamilnadu, Pipe Friction Apparatus Dealer in Tamilnadu,

Pipe Friction Apparatus Manufacture in Tamilnadu, Pipe Friction Apparatus Manufacture in Chennai, Pipe Friction Apparatus Manufacture in Kanchipuram, Pipe Friction Apparatus Manufacture in Tiruvallur, Pipe Friction Apparatus Manufacture in Cuddalore, Pipe Friction Apparatus Manufacture in Villupuram, Pipe Friction Apparatus Manufacture in Vellore, Pipe Friction Apparatus Manufacture in Tiruvannamalai, Pipe Friction Apparatus Manufacture in Salem, Pipe Friction Apparatus Manufacture in Namakkal, Pipe Friction Apparatus Manufacture in Dharmapuri, Pipe Friction Apparatus Manufacture in Erode, Pipe Friction Apparatus Manufacture in Coimbatore, Pipe Friction Apparatus Manufacture in The Nilgiris, Pipe Friction Apparatus Manufacture in Thanjavur, Pipe Friction Apparatus Manufacture in Nagapattinam, Pipe Friction Apparatus Manufacture in Tiruvarur, Pipe Friction Apparatus Manufacture in Tiruchirappalli, Pipe Friction Apparatus Manufacture in Karur, Pipe Friction Apparatus Manufacture in Perambalur, Pipe Friction Apparatus Manufacture in Pudukkottai, Pipe Friction Apparatus Manufacture in Madurai, Pipe Friction Apparatus Manufacture in Theni, Pipe Friction Apparatus Manufacture in Dindigul, Pipe Friction Apparatus Manufacture in Ramanathapuram, Pipe Friction Apparatus Manufacture in Virudhunagar, Pipe Friction Apparatus Manufacture in Sivagangai, Pipe Friction Apparatus Manufacture in Tirunelveli, Pipe Friction Apparatus Manufacture in Thoothukkudi, Pipe Friction Apparatus Manufacture in Kanniyakumari, Pipe Friction Apparatus Manufacture in Krishnagiri, Pipe Friction Apparatus Manufacture in Ariyalur, Pipe Friction Apparatus Manufacture in Tiruppur 

Product Details:

Inclined Tube Manometer :

Specification:

In a U-tube manometer, the pressure causes the liquid column to move. The pressure difference is read directly from a scale and is the measure for the applied pressure. In inclined tube manometers, one leg points diagonally up. A small height difference therefore changes the length of the liquid column significantly. The apparatus consists of U-tube incline tube manometer, motor and pressure gauges.

Tag: Inclined Tube Manometer manufacture in Coimbatore,Salem, Erode, Dharmapuri Inclined Tube Manometer Dealer in Coimbatore,Salem, Erode, Dharmapuri, Inclined Tube Manometer Distributor in Coimbatore,Salem, Erode, Dharmapuri

Product Details:

Reciprocating Pump Assembly

We offer

Reciprocating Pump Assembly in Coimbatore, Chenni, Tamilnadu

Specifications:

• Pump : Suguna make, size 1” x 3/4” Double acting piston pump.
• Motor : Kirloskar make 1 HP, 1440 RPM, 3 phase
• Pipelines : B class pipes with fittings.
• Valves : Gun metal Gate valve for flow control, ball valve for tank drain, foot valve
• Pressure and Vacuum gauge : Fiebig make.
• Tanks : All tanks made of 3mm MS sheet with fiberglass lining.
• Sump tank size : 2000 x 500 x 300 mm
• Collecting tank size : 500 x 500 x 600 mm
• Panel : Board to house Main Switch starter ,and Energy meter
• Main switch : GEM / HPL
• Starter : L T
• Energy meter : ECE

Taag: Reciprocating Pump Test Rig Manufacture in Tamilnadu,Reciprocating Pump Test Rig Manufacture in Chennai,Reciprocating Pump Test Rig Dealer in Chennai, Reciprocating Pump Test Rig Dealer in Tamilnadu

Reciprocating Pump Assembly Manufacture in Tamilnadu,  Reciprocating Pump Assembly Manufacture in Chennai, Reciprocating Pump Assembly Manufacture in Kanchipuram,  Reciprocating Pump Assembly Manufacture in Tiruvallur, Reciprocating Pump Assembly Manufacture in Cuddalore, Reciprocating Pump Assembly Manufacture in  Villupuram, Reciprocating Pump Assembly Manufacture in Vellore,  Reciprocating Pump Assembly Manufacture in Tiruvannamalai, Reciprocating Pump Assembly Manufacture in Salem,  Reciprocating Pump Assembly Manufacture in Namakkal, Reciprocating Pump Assembly Manufacture in Dharmapuri, Reciprocating Pump Assembly Manufacture in Erode, Reciprocating Pump Assembly Manufacture in Coimbatore, Reciprocating Pump Assembly Manufacture in The Nilgiris, Reciprocating Pump Assembly Manufacture in Thanjavur, Reciprocating Pump Assembly Manufacture in Nagapattinam, Reciprocating Pump Assembly Manufacture in Tiruvarur,  Reciprocating Pump Assembly Manufacture in Tiruchirappalli, Reciprocating Pump Assembly Manufacture in Karur, Reciprocating Pump Assembly Manufacture in Perambalur, Reciprocating Pump Assembly Manufacture in Pudukkottai, Reciprocating Pump Assembly Manufacture in Madurai, Reciprocating Pump Assembly Manufacture in Theni, Reciprocating Pump Assembly Manufacture in Dindigul, Reciprocating Pump Assembly Manufacture in Ramanathapuram, Reciprocating Pump Assembly Manufacture in Virudhunagar, Reciprocating Pump Assembly Manufacture in Sivagangai, Reciprocating Pump Assembly Manufacture in Tirunelveli, Reciprocating Pump Assembly Manufacture in Thoothukkudi, Reciprocating Pump Assembly Manufacture in Kanniyakumari, Reciprocating Pump Assembly Manufacture in Krishnagiri, Reciprocating Pump Assembly Manufacture in Ariyalur, Reciprocating Pump Assembly Manufacture in Tiruppur

Product Details:

Pitot Tube Apparatus :

INTRODUCTION:

Pitot tube is a small ‘L’ shaped tube, with both end open. The ben d side portion is inserted in the pipe line the other end is kept open to atmosphere. This end may be connected to a sensitive manometer to measure the head in that plane i.e. path of flow. From this head we can find out the velocity of flow.

APPARATUS:-

A pitot tube made up of small copper tube is held in a pipe line. A screw type arrangement is provided to raise or lower this pitot tube. The open end is connected to a manometer.

 

WATER HAMMER.

Technical specification

Sump tank – sutaible size

Head tank – 600x600x800mm

Tag: Pitot Tube Apparatus manufacture in Coimbatore,Salem, Erode, Dharmapuri Pitot Tube Apparatus Dealer in Coimbatore,Salem, Erode, Dharmapuri, Pitot Tube Apparatus Distributor in Coimbatore,Salem, Erode, Dharmapuri